PFA Immersion Tank Heaters Industrial Photovoltaic Heater
PV or Solar Cells
Usually made of silicon, high efficiency, low-cost, long-life
Photovoltaic (PV) solar cells are made by depositing PV material
layers on a supporting material. Layering multiple semiconductors
to create multijunction cells increases efficiency.
PFA Immersion Frame Heaters are great for heating fluid baths to a
constant temperature
Product Description
Industrial Immersion Heaters - Fluoropolymer (PFA) Immersion Fence
Heaters
High performance, non-corrodable electric tank heater
The Popular is manufactured from high integrity fluoropolymers to
give best protection against deterioration and to give high
performance in corrosive solutions.
Now available - fitted to order
OTP: Protect your plant from catastrophic heater failure.
Switches the heater off if the element gets too hot.
HPD: Protect your heater from low level failure.
Simple conductive level device built into the heater.
The element has an open construction to allow free flow of liquid
across the surface and to limit solid retention, which is
particularly important when used in solutions which generate solid
deposition such as electroless nickel and copper plating processes.
The heater is thin enough to fit easily into confined spaces, for
example behind anode baskets. The Popular can be supplied with
hanging brackets for vertical mounting or standoffs for horizontal
mounting. The integral BraudeFlex lead has no junctions and is
continuous and flexible.
Typical applications: Electroplating, electroless plating,
anodising, acid pickling, frost protection for chemical storage
tanks, chemical processes, marine water tanks, many more.
Industrial Immersion Heaters - Fluoropolymer Heater
Watts | Voltage | Phase | Dimension(mm) |
2000 | 120-600 | Single or Three | 300×150×40 |
3000 | 240-600 | Single or Three | 350×180×40 |
4500 | 240-600 | Single or Three | 450×200×40 |
6000 | 240-600 | Single or Three | 600×250×50 |
9000 | 240-600 | Single or Three | 750×350×50 |
10000 | 240-600 | Single or Three | 800×450×50 |
12000 | 240-600 | Single or Three | 900×500×50 |
15000 | 240-600 | Single or Three | 1000×600×50 |
18000 | 240-600 | Single or Three | 1100×700×50 |
Other Applications(Other products)
Electrochemical Deposition
Electrochemical Deposition is a cost-effective process using
oxidation and reduction to adhere metal to a surface using
electricity. The process is also sometimes referred to as
Electro-Plating. Surplus products deliver full power supply output
performance, high efficiency, high-speed DC output, connectivity,
reliability, and ETL certification.
Electrochemical Deposition Products(2) |
HXSL SERIES
Custom, low watt density, fluoropolymer (PTFE) sleeved bottom
heater with flexible riser. Single phase. 1000-6000 watts, 120-600
volts.
 | HXRL SERIES
Low watt density, fluoropolymer (PTFE) sleeved bottom heater with
flexible riser. Single phase. 1000-6000 watts, 120-600 volts. 
| HXO SERIES
Low watt density, O shaped fluoropolymer (PTFE) sleeved 304
stainless elements inert to most solutions. 500-9000 watts, 120-600
volts.
 |
RO/DI Water Heating
Deionized water (DI Water) has become a crucial part of many
industrial process applications' impurity removal process. Cleaning
semiconductors or other ultra-clean end-use devices requires the
highest level of purity to reduce product failure.
Products For RO/DI Water Heating
Applications Semiconductor Flat Panel Display
|
Heating Systems for Purified, DI Water 
| PTFE Inline Chemical Heater 
|
