208V 1P 3KW 350x250x40mm Optimized Efficiency PTFE Submersible
Semiconductor Heater
Voltage: 208V 1Phase
Power: 3KW
Dimension: 350*250*40MM, can do as your requirements
Material: PTFE+PFA heating wire
Usage: Put on the bottom of the chemical tank to heating up the tank
solutions.
Industries
Semiconductor
Ultra-High-Purity Solutions
Surplus designs and manufactures thermal solutions and power
supplies to meet the most stringent cleanroom,
ultra-high-purity (UHP) processes, and customer requirements of the
Semiconductor and Wafer Processing industries.
Applications
Wet-Deposition
Flammable Solvent Heating
Chemical Heating
RO/DI Water Heating
Ultra-High-Purity Heating
PRODUCT OVERVIEW
Heaters For Semiconductor are great for heating fluid baths to a constant temperature. These
heaters are ideal for use in the semiconductor, pharmaceutical, and
biomedical industries. First of all, these immersion heaters
provide clean heat evenly and efficiently. Furthermore, they’re
compact and highly customizable. They provide a maximum process
work area, and consume a minimal amount of chemicals. Moreover,
wetted surfaces feature all-PFA materials, and may be used in tanks
made of PVDF, PFA, or quartz. Please contact us with inquiries
about other tank materials.
BOTH AGGRESSIVE CHEMISTRIES AND DEIONIZED WATER
These rugged and durable heaters come in grid, frame, and fence
models, with outputs of 1.0 to 30.0 kW. Most importantly, they
feature a low watt density (≤ 4 watts/in²) for a fast heating
response. Furthermore, these heaters integrate easily into most
process tanks. Provide Surplus with your specifications and tank
size, and let us build an immersion heater for you.
SAFETY FEATURES
At the heart of these immersion heaters is the patented
PreciseHeater heating coil, with a efficiency of > 99% and a
MTBF of more than 10 years. Moreover, a microprocessor-based
temperature controller regulates the heater output. Additionally,
optional safety features include both platinum and embedded ground
wires, a Type-J process thermocouple, and RTD over-temperature and
process thermocouples.
KEY SPECIFICATIONS
Maximum heating temperature of these immersion heaters is 200º C
(392º F), with a temperature accuracy of ± 0.1º C (contingent on
customer’s facilitation). Grid heaters are typically ¾” high, and
frame heaters 1 ½” high. Outputs range from 1.0 to 30.0 kW
(dependent on customer voltage), and from 120 VAC to 480 VAC, 1 or
3-ph (dependent on wattage).
| Heater Element | Heating Coil |
|---|
| Wetted Surfaces | PFA/PTFE |
|---|
| Wattages | 1.0 – 20 kW |
|---|
| Voltages | 120 – 480 VAC
1 or 3 phase |
|---|
| Sizes (LxW) | 7x5 to 19x14 inch |
|---|
| Height | 1-5/8 inch |
|---|
| Temperature | 200°C (392°F) |
|---|
| Hi-Limit Sensor | Type-J thermocouple |
|---|
| Ground Wire | Encapsulated |
|---|
| Lead Wire | 15-ft |
|---|
Other Applications(Other products)
PTFE Tanks
We can serve you in the teflon lined welded tank, small teflon
lined vessel, mixer PTFE lined vessel and more PTFE teflon lined
tank below.
Material used : PTFE, PFA, FEP, ECTFE, PVDF etched or glass
backing.
Can store acid or alkali
high temperature resistance
Can custom sizes or even install PFA outlet and PFA inlet
RO/DI Water Heating
Deionized water (DI Water) has become a crucial part of many
industrial process applications' impurity removal process. Cleaning
semiconductors or other ultra-clean end-use devices requires the
highest level of purity to reduce product failure.
Products For RO/DI Water Heating
Applications Semiconductor Flat Panel Display
|
Heating Systems for Purified, DI Water 
| PTFE Inline Chemical Heater 
|
Acid Heating And Corrosive Chemical Heating
Built to withstand the stress of acids or other corrosive chemicals
while maintaining the highest quality and safety standards, Process
Technology fluoropolymer (PTFE) heaters and exchangers are
engineered to perform.
| Acid Heating And Corrosive Chemical Heating(1) |
3HX Series | HXT SERIES – SCREWPLUG 
| 9HX SERIES 
|
6HX SERIES 
| 3HXOL SERIES  | HXSL SERIES 
|
